Rating:
in stock

IC-FR5000, IC-FR6000

iCOM
FCC CE RoHS

UNIQUE TWO-IN-ONE REPEATERS

The IC-FR5000 series combines superior analog specifications with competitive cost performance. Its slim, rackmount design allows you to install two RF modules* in one unit. In addition, the built-in IDAS digital mode paves the way to a future digital migration now.

* Optional UR-FR5000/UR-FR6000 is required.

Two RF modules in one unit

The IC-FR5000 series has an internal space for installing an optional RF unit, UR-FR5000 series. Two RF modules can be installed in a chassis reducing installation space, and increasing channel capacity. They can be programmed and operated independently.

50W output at 50% duty cycle,
25W 100% duty cycle operation*

Employing a high performance power amplifier, the IC-FR5000 series provides a reliable 100% duty cycle operation at 25W output. When operated at the high power setting of 50W, the repeater operates with a 50% duty cycle.

* Ambient temperature: 25°C

50W output at 100% duty cycle,
100W 50% duty cycle operation with optional Power Amplifier*

When need higher power, the optional UR-PA5000 series power amplifier provides 100W output power with a 50% duty cycle and 50W output with 100% duty cycle.

* Ambient temperature: 25°C

19-inch rack mount design, 2U height low profile design

The IC-FR5000 series has a rack mount bracket and handles for installation in an industry standard 19-inch rack.

Multiple CTCSS and DTCS tone decode

The IC-FR5000 series detects multiple CTCSS and DTCS on a channel (up to 16 tones on a table) and downlinks (transmits) the received signal with a specified tone. This function is useful for sharing a channel with multiple groups.

Base station operation

The IC-FR5000 series has 5 programmable buttons, 12-digit dot-matrix display and 32 memory channels allowing you to use the repeater as a base station

ASK FOR PRICE

Other features

  • Programmable accessory connector (D-sub 25-pin) for connecting trunking controllers or other external devices
  • 5-Tone and DTMF encoder/decoder
  • CW ID transmitter
  • Normal and priority scan setting
  • Wide frequency coverage
  • Built-in audio compander
  • Optional voice scrambler UT-109R/UT-110R and built-in inversion type voice scrambler*
* Inversion type voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.

General

 

IC-FR5000

IC-FR6000

Frequency coverage
(Varies according to version)
136-174 MHz
400-470 MHz
450-512 MHz
450-520 MHz
350-400MHz (Non - FCC)
Number of channels
32 ch
Channel spacing
(Varies according to version)
6.25/12.5/25 or 7.5/15/30 kHz
Type of emission
16K0F3E,
11K0F3E,
11K0F7E/D/W,
8K50F3E
(EXP version only),
4K00F1E/D,
4K00F3E
16K0F3E,
11K0F3E,
11K0F7E/D/W,
4K00F1E/D,
4K00F3E
Power supply requirement
13.6V DC
Current drain
(at 13.6V DC)
Tx High
15A
Rx Stand-by
400mA*1
Max. audio
1900mA
Dimensions
(projections not included; W×H×D)
483×88×260 mm
19.02×3.46×10.24 in
Weight (approx.)
5.6kg; 12.3lb

*1 Repeater operation only.

 

Transmitter

 

IC-FR5000

IC-FR6000

RF output power (High)
50W
Spurious emissions
80dB
Frequency stability
±0.5ppm
Audio harmonic distortion
1% typical
40% deviation
FM Hum and Noise
52dB typ. (W)
49dB typ. (N)
50dB typ. (W)
45dB typ. (N)
Digital FSK error 5% max.


 

Receiver

 

IC-FR5000

IC-FR6000

Sensitivity FM at 12dB SINAD
0.25µV (typ.)
Digital at 5% BER
0.20μV (typ.)
Adjacent channel selectivity (W/N)
78/56dB typ.
Spurious response rejection
90dB typ.
Intermodulation rejection
78dB typ.
AF output power (at 5% distortion)
4.0W (typ.) with a 4Ω load
* 25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions. Ask your dealer if you need 25kHz bandwidth.

 

FUNCTION COMPARISON AND INTERNAL UNIT OPTIONS

 

IC-FR5000
IC-FR6000

Type-D multi-site trunking
UC-FR5000 + CF-FR5000MT
Type-D single-site trunking
UC-FR5000
Type-C trunking
-
Multi-site conventional
UC-FR5000 + CF-FR5000MC*2
Digital voice scrambler
available
DES Encryption  
-
AES Encryption  
-
CTCSS/DTCS (Encoder/Decoder)
available
2-Tone (Encoder/Decoder)
-
5-Tone (Encoder/Decoder)
available
DTMF autodial
available
decoder
available
Voice Scrambler*1 Inversion
available
Non-rolling/ Rolling
UT-109R/UT-110R
 
MDC 1200  
-
LTR™ trunking  
available*3
GPS receiver
-
Channel announcement
-
Voice recorder
-
IP rating

-

MIL standard
MIL-STD-810-F
*1 Inversion type voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.
*2 Multi-site conventional system must use the IC-FR5000/FR5200H series. Cannot mix with the IC-FR5000C series.
*3 External controller required.

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard MIL-810 F
Method, Proc.
High Temperature Storage
501.4 I
High Temperature Operation
501.4 II
Low Temperature Storage
502.4 I
Low Temperature Operation
502.4 II
Vibration
514.5 I
Shock Functional
516.5 I


All stated specifications are subject to change without notice or obligation.

54687621
/
iCOM
54687621
/
iCOM
54687621
/
iCOM